IS61C1024 |
RFQ for IS61C1024 Required Field |
 |
| Technical/Catalog Information | IS61C1024AL-12HLI |
| Vendor | ISSI, Integrated Silicon Solution Inc |
| Category | Integrated Circuits (ICs) |
| Memory Type | SRAM - Asynchronous |
| Memory Size | 1M (128K x 8) |
| Speed | 12nS |
| Interface | Parallel |
| Package / Case | 32-sTSOP |
| Packaging | Tray |
| Voltage - Supply | 4.5 V ~ 5.5 V |
| Operating Temperature | -40°C ~ 85°C |
| Format - Memory | RAM |
| Lead Free Status | Lead Free |
| RoHS Status | RoHS Compliant |
| Other Names | IS61C1024AL 12HLI IS61C1024AL12HLI |
| Product | Manufacturers | Pack | D/C |
| IS61C1024 | - | N/A | N/A |
The ISSI IS61C1024 and IS61C1024L are very high-speed,low power, 131,072-word by 8-bit CMOS static RAMs. They are fabricated using ISSI's high-performance CMOS technology. This highly reliable process coupled with innovative circuit design techniques, yields higher performance and low power consumption devices.
When CE1 is HIGH or CE2 is LOW (deselected), the device assumes a standby mode at which the power dissipation can be reduced by using CMOS input levels.
Easy memory expansion is provided by using two Chip Enable inputs, CE1 and CE2. The active LOW Write Enable (WE) controls both writing and reading of the memory.
The IS61C1024 and IS61C1024L are available in 32-pin 300-mil SOJ, and TSOP (Type I, 8x20), and sTSOP (Type I, 8 x 13.4) packages.
Features |
| • High-speed access time: 12, 15, 20, 25 ns• Low active power: 600 mW (typical)• Low standby power: 500 W (typical) CMOS standby• Output Enable (OE) and two Chip Enable (CE1 and CE2) inputs for ease in applications• Fully static operation: no clock or refresh required• TTL compatible inputs and outputs• Single 5V (±10%) power supply• Low power version available: IS61C1024L• Commercial and industrial temperature ranges available |
| Symbol | Parameter |
Value |
Unit |
| VTERM | Terminal Voltage with Respect to GND |
0.5 to+7.0 |
V |
| TBIAS | Temperature Under Bias |
55 to +125 |
|
| TSTG | Storage Temperature |
65 to +150 |
|
| PT | Power Dissipation |
1.5 |
W |
| IOUT | DC Output Current (LOW) |
20 |
mA |
